Moin Sebastian,
vielen Dank schonmal für Deine Antwort. Soweit ich die Werte, die mir smartctl ausspuckt, deuten kann, hat die Festplatte genau 5 Sektoren neu zugewiesen. Allerdings komm ich mit den Werten nicht so ganz klar, was genau heißt in diesem Zusammenhang denn "VALUE", "WORST", "THRESHOLD" und "RAW_VALUE"? Auch auf der Page hab ich da keine passende Doku gefunden.
Was die mutwillige Zerstörung betrifft, ich hab auch schon an die brutale Variante gedacht. Wenn man aber bissl durch die Gegend surft, stellt man leicht fest, dass Free- und Sharewareprogrammierer schon zig Daten direkt von der Platte abrufen können, da möcht ich lieber nicht wissen, an welche Daten der Hersteller noch so rankommt.
So wie es aussieht, hatte die Platte ja eindeutig einen Defekt (sonst wären ja keine Sektoren ge-reallocated). Auch die unteren Einträge sprechen ja eindeutig dafür. Zwar ist die Platte momentan verewndbar, aber wenn das erstmal losgeht mit defekten Sektoren, ist es ja normalerweise nur noch eine Frage der Zeit, bis die restlichen Sektoren auch hops gehen, also werd ich den Umtausch wohl mal versuchen.
Was mich nur wundert: Starte ich smartctl mit dem Parameter -H, meldet die Platte ein fröhliches
Code: Alles auswählen
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
Vermutlich wohl, weil die Platte noch gesunde Ausweichsektoren zur Verfügung hat?
Soweit erstmal ein schönes Dankeschön!
Greetz
RR
Anbei noch die Ausgabe von smartctl mit dem Parameter -a:
Code: Alles auswählen
smartctl version 5.33 [i386-pc-mingw32] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: IC35L040AVER07-0
Serial Number: SXPTXTQT614
Firmware Version: ER4OA46A
User Capacity: 41,174,138,880 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 5
ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1
Local Time is: Fri Nov 19 17:00:49 2004 Westeuropäische Normalzeit
==> WARNING: IBM Deskstar 60GXP drives may need upgraded SMART firmware.
Please see http://www.geocities.com/dtla_update/index.html#rel and
http://www-3.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-42215 or
http://www-1.ibm.com/support/docview.wss?uid=psg1MIGR-42215
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (1383) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 23) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 060 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 100 100 024 Pre-fail Always - 221 (Average 218)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 1468
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 5
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 12774
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 774
192 Power-Off_Retract_Count 0x0032 099 099 050 Old_age Always - 1468
193 Load_Cycle_Count 0x0012 099 099 050 Old_age Always - 1468
194 Temperature_Celsius 0x0002 148 148 000 Old_age Always - 37 (Lifetime Min/Max 10/58)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 5
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 43
SMART Error Log Version: 1
ATA Error Count: 512 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 512 occurred at disk power-on lifetime: 12748 hours (531 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 e0 90 fe af
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
fe a2 01 e0 90 fe ef 02 00:14:41.800 [VENDOR SPECIFIC]
fe a1 00 00 00 00 a0 02 00:14:41.800 [VENDOR SPECIFIC]
fe a6 50 60 4d 5b a2 02 00:14:41.600 [VENDOR SPECIFIC]
fe a6 50 60 4d 5b a2 02 00:14:41.400 [VENDOR SPECIFIC]
fe a6 50 60 4d 5b a2 02 00:14:41.100 [VENDOR SPECIFIC]
Error 511 occurred at disk power-on lifetime: 12734 hours (530 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 59 01 e3 4d cd e2 Error: UNC at LBA = 0x02cd4de3 = 47009251
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 e3 4d cd e2 02 7d+19:18:24.500 READ SECTOR(S)
20 00 01 e2 4d cd e2 02 7d+19:18:24.500 READ SECTOR(S)
20 00 01 e1 4d cd e2 02 7d+19:18:24.500 READ SECTOR(S)
20 00 01 e0 4d cd e2 02 7d+19:18:24.500 READ SECTOR(S)
20 00 01 df 4d cd e2 02 7d+19:18:24.500 READ SECTOR(S)
Error 510 occurred at disk power-on lifetime: 12734 hours (530 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 1d e3 4d cd e2 Error: UNC at LBA = 0x02cd4de3 = 47009251
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 00 40 c0 4d cd e2 02 7d+19:18:19.300 READ VERIFY SECTOR(S)
40 00 40 80 4d cd e2 02 7d+19:18:19.300 READ VERIFY SECTOR(S)
40 00 40 40 4d cd e2 02 7d+19:18:19.300 READ VERIFY SECTOR(S)
40 00 40 00 4d cd e2 02 7d+19:18:19.300 READ VERIFY SECTOR(S)
40 00 40 c0 4c cd e2 02 7d+19:18:19.300 READ VERIFY SECTOR(S)
Error 509 occurred at disk power-on lifetime: 12734 hours (530 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 59 01 00 8c a5 e2 Error: AMNF at LBA = 0x02a58c00 = 44403712
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
20 00 01 00 8c a5 e2 02 7d+19:17:33.300 READ SECTOR(S)
40 00 40 00 8c a5 a0 04 7d+19:17:33.300 READ VERIFY SECTOR(S)
40 00 40 00 8c a5 e2 02 7d+19:17:27.900 READ VERIFY SECTOR(S)
fa ac 00 00 00 00 a0 02 7d+19:17:27.900 [VENDOR SPECIFIC]
fb ac 00 00 00 00 a0 02 7d+19:17:27.900 [VENDOR SPECIFIC]
Error 508 occurred at disk power-on lifetime: 12734 hours (530 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 40 00 8c a5 e2 Error: AMNF at LBA = 0x02a58c00 = 44403712
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
40 00 40 00 8c a5 e2 02 7d+19:17:27.900 READ VERIFY SECTOR(S)
fa ac 00 00 00 00 a0 02 7d+19:17:27.900 [VENDOR SPECIFIC]
fb ac 00 00 00 00 a0 02 7d+19:17:27.900 [VENDOR SPECIFIC]
20 00 01 ff 8b a5 a0 04 7d+19:17:27.900 READ SECTOR(S)
20 00 01 ff 8b a5 e2 02 7d+19:17:22.700 READ SECTOR(S)
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 12748 -
# 2 Short offline Completed without error 00% 12734 -
Device does not support Selective Self Tests/Logging
